SuryaSteels.com

Structural

Crane Rails

Wire Rods

Plates

Structurals:

Rationalised sizes of Beams/ Joists, Channels and Angles

Sections	Dimensions (mm)	Sectional Weight (kg/m)	Length (m)
Beams/Joists	Durgapur Steel Plant
	175 x 85 x 5.8	19.6	10 to 11.5
	200 x 100 x 5.7	24.2	10 to 11.5
Beams	Bhilai Steel Plant
	250 x 125 x 6.9	37.3	10 to 13 for all dimensions
	300 x 140 x 7.7	46.0
	350 x 140 x 8.1	52.4
	400 x 140 x 8.9	61.5
	450 x 150 x 9.4	72.4
	500 x 180 x 10.2	86.9
	600 x 210 x 12	123.0
Channels	Bhilai Steel Plant
	75 x 40 x 4.8	7.14	10 to 12
	100 x 50 x 5	9.56	10 to 12
	Durgapur Steel Plant
	125 x 65 x 5.3	13.10	10 to 11.5 for all dimensions
	125 x 66 x 6	13.70
	150 x 75 x 5.7	16.80
	400 x 140 x 8.9	61.5
	150 x 76 x 6.5	17.70
	175 x 75 x 6	19.60
	200 x 75 x 6.2	22.30
	200 x 76 x 7.5	24.30
	Bhilai Steel Plant
	250 x 82 x 9	34.2	10 to 12 for all dimensions
	300 x 90 x 7.8	36.3
	400 x 100 x 8.8	50.1
Angles	Bhilai Steel Plant
	50 x 50 x 5*	3.8	10 to 13 for all dimensions
	50 x 50 x 6	4.5
	60 x 60 x 5/6/8*	4.5/5.4/7.0
	65 x 65 x 5*	4.9
	65 x 65 x 6/8/10	5.8/7.7/9.4
	70 x 70 x 5/6*	5.3/6.3
	75 x 75 x 5/ 6/ 8/ 10	5.7/6.8/8.9/11.0
	80 x 80 x 6/8/10	7.3/9.6/11.8
	90 x 90 x 6/8/10	8.2/10.8/13.4
	Durgapur Steel Plant
	100 x 100 x 10/12	14.9/17.7	10 to 11.5 for all dimensions
	110 x 110 x 10/12	16.6/19.7
	130 x 130 x 10/12	19.7/23.5
	150 x 150 x 12/16	22.9/27.3
	Bhilai Steel Plant
	150 x 150 x 16/ 20*	35.8/44.1	10 to 13 for all dimensions
	200 x 200 x 16	48.5
	200 x 200 x 20	60.0
	200 x 200 x 24	70.8

* Can be produced, if sufficient orders are available.

While standard lengths are mentioned in tables above, Bhilai Steel Plant can supply material in any fixed length in the range 6 - 13 m and DSP can supply in any fixed length in the range 5.5 - 11.5 m

Common Grades: IS 2062/1999 and SAILMA

Copper bearing structurals are also rolled as per customer's specifications. High strength quality light structurals as per the needs of TLT manufacturers also available.

Structurals are also available in the following foreign specifications: ASTM-A-36, JIS-G-3101-SS400, BS-4360 Grades 40A, 43A, 43B, 43C, 50B, 50C, EN-10025, Grades S-275 JO, JR, S-355 JO, JR, DIN-17100 ST 37.2/44.2 (all in semi-killed quality), if sufficient orders are available.

Crane Rails:

Profile	Sectional Weight (kg/m)	Standard Length (m)	Mill
CR - 80*	64.2	13	Rail & Structural Mill, Bhilai
CR - 100*	89.0	13
CR - 120*	118.0	13	Rail & Structural Mill, Bhilai
CR - 140*	147.0	13	Rail & Structural Mill, Bhilai

* Denotes head width

Specification	Chemical Composition
	C%	Mn%	P% Max	S% Max	Si %
Crane Rails	0.40-0.65	0.85-1.55	0.060	0.060	0.03-0.30

Bar Rods & Rebars:

Rationalised sizes of Bars, Rods and Rebars

Size mm	Weight kg/m	Size mm	Weight kg/m	Length m
		8	0.395	5.5 to 13	BWRM
		10	0.167	for all	BWRM
		16	1.58	sizes	DMM
18	2.00	18	2.00		DMM
20	2.47	20	2.47		DMM
22	2.98	22	2.99		DMM
25	3.85	25	3.86		DMM
28	4.83	28	4.83		DMM/BMM
32	6.31	32	6.36		BMM
33.5*	6.92				BMM
36	7.99	36	7.99		BMM
40	9.85	40	9.85		BMM
		45	12.50		BMM
50	15.41				BMM
53	17.32*				BMM
56	19.34				BMM
60*	22				BMM
63	24.47				BMM
67	27.68*				BMM

*Bright Bar Sizes

Abbreviations Used
BWRM	Bhila Wire Rod Mill
BMM	Bhilai Merchant Mill
DMM	Durgapur Merchant Mill

Common grades: IS 2062/ 1999, IS 1786/ 1985, SAIL TMT and SAIL TMT HCR. Also available in the following foreign specifications: ASTM-A 615 Grade 40 (for TMT wire rods) and ASTM-A 615 Grade 40/ Grade 60 (for TMT Bars), if sufficient orders are available.

Tolerance as per IS 1786 or equivalent.

Packaging : Signode strapping in bundles of 5 tonnes

Rounds are available in straight lengths. Plain Rounds/ TMT rebars/ TMT-HCR rebars in sizes 8 and 10 mm are available in coils. The other sizes of Plain Rounds/ TMT rebars/ TMT-HCR rebars are available in straight lengths.

High Temperature Strength

SAIL TMT-HCR reinforcement bars exhibit higher thermal resistance even at temperatures up to 600 0 C. The retention of significant strength or, in other words, resistance to softening, is attributed to design of steel chemistry, presence of tempered martensite layer on the rebar surface and absence of any cold worked structural zone. Thus the thermally hardened SAIL TMT-HCR rebars are ideal for use in places prone to fire hazards.

Wire Rods:

Rods in Coils
Size mm	Weight kg/m	Mill
5.5	0.186	BWRM
6	0.222	BWRM
7	0.32	BWRM
8	0.395	BWRM
10	0.617	BWRM

Abbreviation used - BWRM:Bhilai Wire Rod Mill

Coil Weight: 850 kg per coil

Coil Dimension: Outer diameter -1240/ 1380 mm; Inner diameter 830/ 956 mm; Height 512/ 620 mm

Packaging: Each coil is strapped with metallic straps.

Common grades: IS 2062/1999, IS 2879/1998, SWR-14, SWR-10, SAE 1008*, SAE 1010* (* CHQ under development)

Materials are also available in the following foreign specifications: JIS-G-3505-SWRM-10, JIS-G-3112-1991-SR-235, ASTM-A 510 M-93, SAE-1015, if sufficient orders are available.

HR Coils Sheets & Skelp

Rourkela Steel Plant
Rationalised sizes of Hot Rolled Coils

Thickness mm	Width mm
2.0	825, 930, 1000, 1020, 1040
2.2	930, 1000, 1020, 1040
2.5	930, 1000, 1020, 1040, 1130
2.8	930, 1000, 1020, 1040, 1130, 1250
3.1,3.5	930, 1000, 1040, 1130, 1250, 1310
3.8, 4.3, 4.6, 4.8	930, 1000, 1040, 1130, 1250, 1310, 1400, 1420
5.0, 5.6, 6.0	1000, 1040, 1130, 1250, 1310, 1400, 1420
7.0, 8.0, 9.0, 10.0, 12.0	1000, 1040, 1130, 1250, 1310, 1400, 1420

Coils can also be supplied in other width/ thickness combination, as per mutual agreement.

Inner diameter of coils: 760 mm. Coil weight: 8 -17 tonnes

Bokaro Steel Plant
Rationalised sizes of Hot Rolled Coils

Thickness mm	Width mm
1.6	930, 940, 960, 1040, 1130
1.8	930, 940, 960, 1040, 1130, 1160,1250
2.0,2.2	930, 940, 960, 1000, 1020, 1040, 1130, 1160, 1250, 1310, 1400, 1420
2.5,2.8	930, 940, 960, 1000, 1020, 1040, 1130, 1160, 1250, 1310, 1400, 1420, 1425
3.1,3.5,3.8	930, 940, 960, 1000, 1040, 1130, 1160, 1250, 1310, 1400, 1420, 1425
4.3,4.6	930, 940, 960, 1000, 1040, 1130, 1160, 1250, 1310, 1400, 1420, 1425, 1550
4.8	930, 1000, 1040, 1130, 1250, 1310, 1400, 1420, 1425
5	930, 1000, 1040, 1130, 1250, 1310, 1370, 1400, 1420, 1500, 1550, 1730, 1829
5.1	930, 1000, 1040, 1130, 1250, 1310, 1370, 1500, 1550, 1730, 1829
5.6,6	930, 1000, 1040, 1130, 1250, 1310, 1370, 1400, 1420, 1500, 1550, 1730, 1829
6.2, 7, 8, 8.6, 9.2, 10	930, 1000, 1040, 1130, 1250, 1310, 1370, 1400, 1420, 1550, 1730, 1829
11,12,14,16	1040, 1130, 1250, 1310, 1370, 1400, 1420 1550, 1730
7.0, 8.0, 9.0, 10.0, 12.0	1000, 1040, 1130, 1250, 1310, 1400, 1420

Coils can also be supplied in 1830 mm width and other sizes, as per mutual agreement

Inner diameter of coils : 850 mm

Outer diameter of coils: 2300 mm (max)

Coil weight: 29 tonnes max.

Bokaro Steel Plant
Rationalised sizes of Hot Rolled Sheets

Thickness mm	Width mm	Length mm
2.00 mm (14G)	1000, 1100, 1250	2500
2.50 mm (12G), 2.90mm, 3.15 mm (10G), 3.55 mm (9G), 4.00 mm (8G)	1000, 1100, 1250, 1400	2500,4000,4500

Thickness and width tolerances are as per IS 1852/ 1985. Closer tolerances can also be supplied on demand.

Hot Rolled Coils,Sheets and Skelp

Packaging: Bare bundles with cross-wise steel strip. Packet weight: 7 - 18 tonnes. Marking: Paint marked on the top sheet of the bundle OR Sticker/label on top sheet of bundle with required details

Common grades for Hot Rolled Coils and Sheets: Is 10748/1995 grades I, II, III, IS 5986/1992 Fe 410, 510, API 5L grades A, B, X42, X46, X52, X56, X60, X65, SAIL-WTCR, IS 11513/1985 grades O, D, DD, EDD, IS 1079/ 1994 grades O, D, DD, EDD, IS 2062/ 1999, Medium Carbon Strapping Steel, MC-11, C-30, 40, 50, Medium Silicon Electrical Steel, IS 6240/1999, SAILMA, IS 2062 grades B, C, IS 5986/1992 Fe 330, 360, 410, 510, SAILRIM, E-34, E-38, SAPH 440, IS 2062/1999 Grade B with copper, SAILCOR/ IRSM-41, IS 8500/1992, SAE 1020, SAE 1012, SAE 1541.

Materials are also available in the following foreign specifications: For structural and general purposes- ASTM-A 36/A 569/A 570 Grades 33/40, JISG 3101 SS400, JISG 3131 SPHC, DIN 17100 ST 37.2/ ST 44.2, BS 4360 Grades 40/43A, EN 10025
For Tube-making and other grades: JISG 3132 SPHT 1/ 2, DIN 1614 Pt. 1/ 2 ST 22/23/24, SAE 1006, SAE 1018 or equivalents, if sufficient orders are available.

HR Sheets for LPG Cylinders

Thickness mm	Width mm	Length mm
2.9	1240	2480
2.8	1250	2500

Sheets can also be supplied in the following sizes on mutual agreement:
2.9 x 1360 x 2720 mm, 2.9 x 1270 x 2540 mm,
3.0 x 1360 x 2700 mm
Other sizes of hot rolled coils and sheets can be supplied as per negotiations

HR Coils for LPG Cylinders

Thickness mm	Width mm
2.9	1155,1160,1685

Durgapur Steel Plant
Rationalised sizes of Skelp

Thickness mm	Width mm
147	2.8, 3.1, 3.8
166	4.3
184	2.5, 2.8, 3.1, 3.5
196	2.5, 2.8, 3.1
205	2.5, 2.8, 3.1, 3.8
212	2.5, 2.8, 3.1
234	3.1, 3.5, 3.8

* Any customised dimension of width 147 mm to 252 mm and thickness 2.5 mm to 4.5 mm can be supplied as per order.

Coil weight: 0.88 - 1.24 tonnes
Inner diameter: 550 mm Outer diameter: 1100 - 1300 mm
Common Grades: Skelp is produced in IS 10748/ 1995, Grades I, II (Sk), IS 11513/ 1985and Medium Carbon.

Plates:

Bhilai Steel Plant
Rationalised sizes of Plates from Plate Mill

Length mm
Thickness mm	Width mm
Thickness mm	1600	1800	2000	2200	2500	2800	3000	3200
8					6300 9300 12500
12			6300 9300 12500	6300 9300 12500	6300 8000 12500	7100 10000
16		5600 7100 9300	5600 6300 7100 8000 9000	5000 6300 8000 9000 12500	5600 7100 8000 10000	5000 6300 9000 9300 10000
20	5600 7100 9300	5000 5600 6300 7100 9000 9300 12500	5000 5600 6300 8000 9000 12500	5600 7100 8000 10000	5000 6300 9000 9300 10000	5600 8000 9000 9300
22	5000 5600 6300 7100 9000 9300 12500	5000 5600 6300 8000 9000 12500	5600 7100 8000 10000	5000 6300 7100 9300 10000	5600 6300 8000 9000 9300	5000 5600 7100 8000 9300	5000 5600 7100 8000 9300
25	5000 5600 6300 8000 12500	5000 5600 7100 10000	5000 6300 9000 9300 10000	5600 6300 8000 9000 9300	5000 5600 7100 8000	6300 7100 12500	6300 12500	5600 6300 12500
28	5000 5600 7100 10000	5000 6300 9000 9300 10000	5600 8000 9000 9300	5000 5600 7100 8000	6300 7100 12500	5600 6300 12500	5600 6300 10000 12500	5000 5600 9300 10000
32	5000 6300 9000 9300 10000	5000 5600 8000 9000	5000 7100 8000	5000 6300 7100 12500	5600 6300 12500	5000 5600 9300 10000	5000 9000 9300 10000	5000 8000 9000 9300 10000
36	5000 5600 8000 9000	5000 7100 8000	6300 7100 12500	5600 6300 12500	5000 5600 9300 10000	5000 8000 9000 9300	8000 9000 9300	7100 8000 9000
40	5000 7100 8000	6300 7100 12500	5600 6300 12500	5000 5600 10000	5000 9000 9300 10000	7100 8000 9000 9300 10000	7100 8000	6300 7100 8000
45	6300 7100 12500	5600 6300 12500	5000 5600 10000	5000 9300 10000	8000 9000 9300	7100 8000	6300 7100	6300 7100
50	5600 6300 12500	5000 5600 9300 10000	5000 9000 9300 10000	8000 9000 9300	7100 8000	6300 7100	5600 6300 7100	5600 6300
56	5000 5600 9300 10000	5000 9300 10000	8000 9000 9300	7100 8000	6300 7100	5600 6300	5000 5600	5000 5600
63	4500 5000 9000 9300 10000	8000 9300	7100 8000	6300 7100	5600 6300	5000 5600	4500 5000	4500 5000
75	7100 8000	6300 7100	5600 6300	5000 5600	4500 5000	4500 5000	4500

MILD STEEL

Structurals:

Crane Rails:

Bar Rods & Rebars:

Wire Rods:

HR Coils Sheets & Skelp

Plates:

Products

info@suryasteels.com

91-9833673898

salesuryasteel@gmail.com

022-66109622